ControlSort Plus

A typical ControlSort system includes all the software and hardware to functionally operator a sorter system. The ControlSort software was designed with a very user friendly interface. This Windows based software is capable of tracking cartons and totes at speeds over 700 feet per minute.

Basic Principle of Sortation ControlSort's primary function is to sort cartons and totes on a sorter system. Our software supports most types of sorters (pop-up, shoe sorters, swing arm, pushers, etc.) and diverter mechanisms. Totes and/or Cartons are scanned by either a barcode scanner or an RFID reader. The data from the scanner is transmitted to the ControlSort software by serial or Ethernet protocol. The data is looked up in the ControlSort database and a sort lane is determined. The carton or tote is tracked, as it moves down the sorter, with an encoder that produces pulses equal to a specific distance travelled. When the carton or tote reaches it's destination lane the diverter is energized and the carton or tote is diverted. Our database has two different modes of operation; Static or Dynamic. In the static mode, the database is pre-populated with lane destinations specific to certain barcode data. In dynamic mode, the database is populated by the Host system (WMS, ERP, FTP, etc.).
Scanners Barcode scanners are the most common means of identifying a tote or carton. Barcode labels can either explicitly state the destination lane or is can serve as data to be looked up in the database to determine the destination lane. Scanners can communicate with ControlSort by either a Serical connection or an Ehternet network connection.
Features Auto-Tune This version of ControlSort includes a feature that, when used with divert trigger photoeyes, automatically tunes the timing on the sorter. When the Auto-Tune feature is turned on and a test carton or tote is sent down the sorter, the distance from the induct photoeye to each lane is automatically set and programmed into the software. This reduced the time required on the initial installation to manually measure each lane's distance from the induct photoeye.
Conveyor Speed Display ControlSort can display the average and current rate at which it is receiving pulses from the conveyor encoder. Together with the user supplied distance-per-pulse value, it will display each rate in a more useful feet-per-minute count, which can then be monitored for irregularities and debugging.

Divert Confirmation

This version of ControlSort includes a Divert Confirmation mode that will send a message to the host when a carton or tote successfully divert to a specific lane. This requires that addition of a divert confirm photoeye for each sort lane.

Error and Fault Logging

This version of ControlSort logs certain errors and faults into an Error Log. These logs can be viewed or printed for analysis. Each error is time stamped and assists with diagnostics and troubleshooting.

Gap Monitoring

This version of ControlSort monitors that gaps between cartons and totes as they are inducted onto the sorter. When a insufficient gap between cartons is determined an error is reported to the error log. This helps with diagnosing sorting problems.

Maximum Number of Destination Lanes

ControlSort Plus supports up to 50 destination lanes and can support up to 20 scanners.

On the Fly Lane Assignments

This version of ControlSort allows the addition of barcode data and lane destinations to the systems database at any time without any need to restart the system. This feature allows entire lanes to be temporarily reassigned to other lanes in the event of emergency maintenance.

Remote Diagnostics

When connected to the internet, this feature allows the ControlSort software to be monitored and diagnosed over the internet. From anywhere in the world our technicians can connect to your software and help diagnose a problem. Security features in the software allow this remote access only when you determine it is necessary.

Report Capabilities

This version of ControlSort maintains a day by day, hour by hour operational statistical report which counts the number of successful diverts, missed diverts, invalid barcode reads, no match look-up in the database and improper gapping errors. Report history can be viewed and printed both as daily records or comprehensively

Slipping Belt Indicator

This version of ControlSort has a built in monitor that, when used with divert trigger eyes, can be used to detect a sorter belt that is slipping. When a tote or carton arrives late at a specific trigger eye it is usually caused by a sorter belt that is slipping. When this happens an error message is sent to the error log and an alarm is flashed on the user interface.